config.def.h

   1 /* software buffers */
   2 const size_t wbuffsz = 1024;
   3 const size_t rbuffsz = 1024;
   4
   5 /* scratch-pads for input processing */
   6 const size_t scratchwsz = 256;
   7 const size_t scratchrsz = 256;
   8
   9 /* `nanosleep()` values inside the read and write loops */
  10 const long swritedelay = 0; /* seconds */
  11 const long nswritedelay = 1000000; /* nanoseconds */
  12
  13 /* other time variable names follow the same logic as above */
  14
  15 const long sreaddelay = 0;
  16 const long nsreaddelay = 1000000;
  17
  18 /* `nanosleep()` values for the DTR pulse */
  19 const long spulsedelay = 0;
  20 const long nspulsedelay = 1000000;
  21
  22 /* lock the opened device */
  23 const int exclusive = 1; /*(0|1)*/
  24
  25 /*
  26  * set the device to blocking mode,
  27  * on some systems this will stop all threads
  28  * of a process during read/write, thus rendering
  29  * ust unusable
  30  */
  31 const int blocking = 1; /*(0|1)*/
  32
  33 /* escape character for interactive use */
  34 const char escapechar = '~';
  35
  36 /* print additional info to stderr */
  37 int verbose = 0; /*(0|1)*/
  38
  39 /*
  40  * device name
  41  *
  42  * Linux:
  43  * ttyS*   - any standard serial port
  44  * ttyUSB* - any USB serial port
  45  *
  46  * FreeBSD:
  47  * cuau* - does not wait for DCD
  48  * ttyu* - 'dial-in' device, waits for DCD
  49  * cuaU* - USB variant
  50  * ttyU* - USB variant
  51  *
  52  * OpenBSD:
  53  * cua*  - does not wait for DCD
  54  * tty*  - 'dial-in' device, waits for DCD
  55  * cuaU* - USB variant
  56  * ttyU* - USB variant
  57  *
  58  * NetBSD:
  59  * dty* - opening does not block, does not wait for DCD
  60  * tty* - 'dial-in' device, blocks opening until a connection is established
  61  * ttyU* - USB variant
  62  */
  63 char line[16] = "/dev/cuau0";
  64
  65 /*
  66  * baud is usually configurable to standard values only,
  67  * custom speed requires both hardware and driver support
  68  */
  69 unsigned int ispeed = 9600;
  70 unsigned int ospeed = 9600;
  71
  72 /*
  73  *  data bits: can be 8,7,6 or 5.
  74  *  9 is not supported
  75  */
  76 char datab = '8';
  77
  78 /*
  79  * stop bits: setting this to 1 enables 2 stop bits for all numbers of data bits
  80  * except 5 - it's 1.5 in that case
  81  */
  82 int stopb = 0; /*(0|1)*/
  83
  84 /*
  85  * local echo (half-duplex mode) and canonical mode
  86  */
  87 int half = 0; /*(0|1)*/
  88 int canonical = 0; /*(0|1)*/
  89
  90
  91 /*
  92  * CR and LF (NL) translation options
  93  */
  94 CRLFOpt tropts = { 0 };
  95 CRLFOpt itropts = { 0 };
  96
  97 /*
  98  * backspace: setting to one makes `^H` the backspace character, `^?` otherwise
  99  */
 100 int backspace = 0; /*(0|1)*/
 101
 102 /*
 103  * the minimum of characters input before sending them to the line
 104  */
 105 int minchars = 1; /*(>=1)*/
 106
 107 /*
 108  * delay between single characters being sent if the buffer has
 109  * more than 1 (redirected stdin, writing a file)
 110  * in nanoseconds
 111  */
 112 long chardelay = 0;
 113
 114 /*
 115  * XON/XOFF flow control
 116  * can be enabled with hardware flow control simultaneously
 117  */
 118 int soft = 0; /*(0|1)*/
 119
 120 /*
 121  * hardware flow control
 122  * 1 - RTS/CTS
 123  * 2 - DTR/DSR (not supported on some platforms)
 124  * 3 - DCD
 125  */
 126 int hard = 0; /*(0|1|2|3)*/
 127
 128 /*
 129  * 1 - even
 130  * 2 - odd
 131  */
 132 int parity = 0; /*(0|1|2)*/